Cool Info About How To Lower The Action On A Fender Stratocaster
Lowering the action could help remedy dgaldeus’s issue, and that can be accomplished by adjusting the saddles and the bridge until the preferred action (low, medium, high) is reached.
How to lower the action on a fender stratocaster. Based on your factory specs, or the basic measurements of three 32nd on the low side and two 32nd on the high side, decide if you need to go up or down on either side 5.use the allen key to. You can set the action super low. Others need higher action to avoid rattles.
Like stated, if all adjustments are in a happy place the action height is just a preference. The obvious adjustment is the screws on the bridge saddles but 90% of the time the truss rod needs adjusting. The recommended action above 13th fret (with a capo on 1st) is just under 2mm on the high e string to just over 2mm on the low (fat) e string.
If you do them all the same every time you won't. I set my action low and then raise it until it becomes harder to play and then lower. In this video i show you how to setup and adjust guitar action string height fender stratocasteramazon store:
Players with a light touch can get away with lower action; Slacken the strings a bit and lower each bridge saddle height adjustment by 1/4 turn then tune up and see how that feels. The mechanism by which the truss rod affects the string height above the fingerboard is quite simple:
Using a 6 (150 mm) ruler, measure the distance between. You just need to do a complete setup. As the bow of the relief decreases, the string action gets lower (or i should.
Tightening the truss rod may also have the effect of lowering the action especially if you have too much relief, but you shouldn't adjust the truss rod to set the action, you adjust. Level and dress all the frets 3.